Multi-switch

Every modeller knows the point that the transmitters runs out of functions.
And it's always just a bit to soon, you just like to control that extra light, sound, motor or anything else.
But you don't have enough channels?
This multiswitch MS16 encoder is there for you!
Just the need of one free..
€44.95
Ex Tax:€37.15
The 16 channel MS16 decoder with a stunning 16 channels of 1A.
..
€49.95
Ex Tax:€41.28
This is the encoder module for the MS4 system specially adapted for the Robbe/Futaba F-14 with high quality switches.
The MS4 system is suitable for almost any radio transmitter on the market*. It's not using time sync signals or any other strange signal system.
It's just using the normal servo si..
€15.95
Ex Tax:€13.18
The MS4 decoder works on almost any RC transmtter.
But for the best usage we advise to use the MS4 encoder that suits with this module.
The MS4 makes 4 switching outputs from 1 servo channel.
Each output can drain up to 3A! and that with a dimension of just 18x12x6mm.
We have multiple versions..
€17.95
Ex Tax:€14.83
This is the encoder module for the MS4 system with high quality switches.
The MS4 system is suitable for almost any radio transmitter on the market*. It's not using time sync signals or any other strange signal system.
It's just using the normal servo signal. The MS4 encoder is easy to mount and h..
€15.95
Ex Tax:€13.18
Dit is de knipperlicht module voor op de multiprop of ander gebruik met 1 normaal kanaal zonder ms4 encoder
Deze heeft de volgende functies:
-Kanaal kort bedienen naar boven: Knipperlicht aan* (uitgang 1)
-Kanaal kort bedienen naar onder: Knipperlicht aan* (uitgang 2)
-Kanaal lang bedienen naa..
€17.95
Ex Tax:€14.83
This is an special version of the MS4.
For control by multiprop or stick function. With just 2 channels, for critical operations.
Can't activate the wrong function when using stick or multiprop for control
Each output can drain up to 0.3A and that with a dimension of just 18x12x6mm.
We have ..
€14.95
Ex Tax:€12.36
This module cleans the signal from the Robbe FC-16 truck&boat transmitter.
This signal has a lot of interference by default.
With this better signal, the module will be more stable.
..
€6.99
Ex Tax:€5.78
Fully on request based on the MP8 encoder module we can place switches and different potentiometers on this module.
..
€44.95
Ex Tax:€37.15
Every modeller knows the point that the transmitters runs out of functions.
And it's always just a bit to soon, you just like to control that extra light, sound, motor or anything else.
But you don't have enough channels?
This multiswitch MS16 encoder is there for you!
Just the need of one free..
€44.95
Ex Tax:€37.15
Every modeller knows the point that the transmitters runs out of functions.
And it's always just a bit to soon, you just like to control that extra light, sound, motor or anything else.
But you don't have enough channels?
This multiswitch MS16 encoder is there for you!
Just the need of one free..
€44.95
Ex Tax:€37.15
The 16 channel MS16 decoder with a stunning 16 channels of 2A.
This is our MS16 decoder module with software adjusted for the Robbe 16 channel multiswitch encoders.
Also the module keeps the special function of our own decoders which makes it more flexible to use.
See the manual for more inform..
€49.95
Ex Tax:€41.28
Extra cable for the multiswitch modules if your own cable is lost or damaged.
*Sold per piece, MS16 uses 2 of this.
..
€2.99
Ex Tax:€2.47
This switch is an direct replacement for the original Robbe F1500 switch.
Uses 3 positions with puls, comes back to the center with a spring.
Designed for the FC18 FC28 and FC16 truck&boat.
Also works on many other transmitters that doesn't use resistors in the wires.
..
€4.99
Ex Tax:€4.12
Showing 1 to 14 of 14 (1 Pages)