CTI Modellbau
Brand: CTI Modellbau
In de modelbouw is het altijd wenselijk in een model een schakelaar te hebben voor verschillende functiegroepen.BIJVOORBEELD: besturen van een voertuig met een laadkraan naar een bestemming, (dus gescheiden rij- en werk functies)Dan zal er van het voertuig als deze op de plek is dus geen gas, geen s..
€47.95
Ex Tax:€39.63
Brand: CTI Modellbau
CTI Hydrauliekpomp aansturing 3 kanaals HPS-3..
€31.95
Ex Tax:€26.41
Brand: CTI Modellbau
Switch module for 4 functions4 times 4 amps with "one" RC channel!In the transmitter no changes are necessary!The four switching outputs will becontrolled as follows:Billet short left = switching output A1 on / offBillet long left = switching output A2 on / offBillet short right = switching output A..
€19.95
Ex Tax:€16.49
Brand: CTI Modellbau
With this module you can set 3 positions for the servo signal
eg hydraulic valve "up" "stop" "down"
eg gearbox with 3 exact positions
Technical operation
3 identical PIC10F220 with 1 potentiometer each and a negative switch control input are located on a "ServoS MP" board (the 3rd negative s..
€26.95
Ex Tax:€22.27
Brand: CTI Modellbau
Thor 14 ESC with forward, stop, reverse
NO BEC
For 5-20V and 6-12 V Pb battery.
NORMAL Version
Width: 23mm, length: 14mm, thickness: 6mm
Weight with cable: 11g
Current: 14 Ampere
*Needs 5V from receiver for operation
..
€19.95
Ex Tax:€16.49
Brand: CTI Modellbau
HANDLEIDING VOOR de Servo elektronica ServoTHOR15Voor gevorderde bouwer.Spanning is van 6 -10 cellen en 12 Volt loodaccu.RDSON is 25 MilliOhm.Maximale Duurstroom is 18 Ampere. Kortstondige Stroom <1sec tot wel 30 Ampere.Voor Accu- en Motor- Aansluiting zijn 1qmm-Siliconenkabel aangebracht.A..
€29.95
Ex Tax:€24.75
Brand: CTI Modellbau
Perfecte kleine regelaars voor trucks, functieboten, of mini toepassingen!
In diverse uitvoeringen leverbaar!
De ideale Regelaar voor Scale Modellen met Bühler-Motoren
en Standardmotoren tot 480.
En zeker ook langzaamdraaiers zoals Graupner BB720 Torque, Johnson , Robbe Power1000
Voor 6-..
€23.95
Ex Tax:€19.79
Brand: CTI Modellbau
Perfecte kleine regelaars voor trucks, functieboten, of mini toepassingen!
In diverse uitvoeringen leverbaar!
De ideale Regelaar voor Scale Modellen met Bühler-Motoren
en Standardmotoren tot 480.
En zeker ook langzaamdraaiers zoals Graupner BB720 Torque, Johnson , Robbe Power1000
Voor 6-..
€23.95
Ex Tax:€19.79
Brand: CTI Modellbau
For the first time these THOR controllers are equipped with a brake so that a vehicle does not roll uncontrolled downhill on a slope.
Another special feature is the high clock speed of 18 KHz. This achieves a more sensitive control and the whistling in the motor is no longer audible.
A self-lear..
€29.95
Ex Tax:€24.75
Brand: CTI Modellbau
For scale models with Bühler motors and standard motors up to the 540 series.
Undervoltage detection
and reduction When switched on, the THOR15Li detects whether a 2-cell or 3-cell LiPo battery is connected.
Accordingly, the voltage monitor is set to 6 volts or 9 volts.
As soon as the batt..
€23.95
Ex Tax:€19.79
Brand: CTI Modellbau
Handleiding voor snelheidsregelaar THOR HF 24 1/2??
Nieuwe regelaar met hoogfrequent regeling, zodat fluiten van de motor in deellast niet hoorbaar zijn.
De hoge regelfrequentie 18KHz is voor de meeste niet hoorbaar (honden en kinderen wellicht nog wel)
Bedrijfsspanning tussen 6 e..
€47.95
Ex Tax:€39.63
Brand: CTI Modellbau
This micro controller for brush motors is ideal for controlling small micro motors with a delay.
Due to the very compact dimensions, it takes up little space.
Width: 15 mm, length: 12 mm, thickness: 4 mm
weight with cables: 6 grams
continuous current: 4 amps, short-term: 12 amps
..
€19.95
Ex Tax:€16.49
Brand: CTI Modellbau
The Thor 4 HF Titan Micro is a "shut-off" with brake specially designed to operate the Titan Micro cylinder.The controller automatically shuts off the Titan cylinder when it reaches the end positions during extension and retraction, or when a load of approx. 0.75 kg is exceeded.It is equipped with a..
€26.95
Ex Tax:€22.27
Brand: CTI Modellbau
The Thor 4 HF Titan1 is a "shut-off" with brake specially designed to operate the Titan 1 cylinder.
The controller automatically shuts off the Titan cylinder when it reaches the end positions during extension and retraction, or when a load of approx. 0.75 kg is exceeded.
It is equipped with a..
€26.95
Ex Tax:€22.27
Brand: CTI Modellbau
The Thor 4 HF Titan2 is a "shut-off" with brake specially designed to operate the Titan 1 cylinder.The controller automatically shuts off the Titan cylinder when it reaches the end positions during extension and retraction, or when a load of approx. 0.75 kg is exceeded.It is equipped with a brake th..
€24.95
Ex Tax:€20.62
Brand: CTI Modellbau
This micro controller for brush motors is ideal for controlling small micro motors with a delay.Due to the very compact dimensions, it takes up little space.With it self learning function it detects the center of the signal at start up of the esc.Width: 15 mm, length: 12 mm, thickness: 4 mmweight wi..
€19.95
Ex Tax:€16.49
Brand: CTI Modellbau
CTI Wandelende laadvloer bediening SBS-3..
€31.95
Ex Tax:€26.41
Brand: CTI Modellbau
Eindstanden schakelaar module..
€19.95
Ex Tax:€16.49
Brand: CTI Modellbau
Motor switch MS2
To reverse the polarity of a motor.
Maximum 4A, 10 cells (12V)
Forward/zero/backward each 100%.
Size: 13x15x4mm
(the MS2 must be controlled with minus, e.g. a module of the PS4 series)
..
€23.95
Ex Tax:€19.79
Brand: CTI Modellbau
Switching module for 4 on/off functions, 2 of which are designed as indicators / hazard warning lights
Switch 4 times 4 amps with "one" RC channel!
With a module that is smaller than a 1 cent coin!
The four switching outputs are switched on and off as follows:
Switch to the left (>0.6s) =..
€19.95
Ex Tax:€16.49
Brand: CTI Modellbau
Brake light B and reversing light R very easy to control.
The module simply becomes a speed controller connected in parallel, e.g. via Y-cable.
Brake light and reversing light will be then depending on the actual drive controlled.
When stationary, the brake light goes out after 5 seconds.
Th..
€19.95
Ex Tax:€16.49
Brand: CTI Modellbau
Maximum voltage is 20 volts.
RDSON is 25 milliohms.
Maximum current is 14 amps.
1qmm silicone cables are attached for battery and motor connection.
Dimensions: 23*14*6mm
BEC supply
The THOR14 does not have its own BEC system, it must be powered by the receiver.
The BEC voltage should b..
€19.95
Ex Tax:€16.49
Brand: CTI Modellbau
THOR 22LF-BR Regelaar met Rem en Achteruitrijlicht 24V..
€31.95
Ex Tax:€26.41
Brand: CTI Modellbau
This controller is a current measuring controller this means you don't need limit switches.
The 4HF Poti uses a measuring resistor to measure the current while the motor is running. When the current is higher than the maximum current set on the potentiometer, the software switches the motor off a..
€39.95
Ex Tax:€33.02
Brand: CTI Modellbau
This micro controller for brush motors is ideal for controlling small micro motors with a delay.
Due to its very compact dimensions, it takes up little space.
Width: 33mm, Length: 28mm, Thickness: 7mm
weight with cables: 25 grams
continuous current: 4 amps, momentary: 12 amps
BEC 1000 mA (up ..
€42.95
Ex Tax:€35.50
Universal servo controller module with combinable functions and 2 adjustment potentiometers.
A travel limit can be set with the left potentiometer. Turning to the right gives a larger total travel, turning to the left gives a smaller total travel.
The actuating speed can be adjusted with the rig..
€19.95
Ex Tax:€16.49
Showing 1 to 27 of 27 (1 Pages)