Menu
Menu
Your Cart
This website uses cookies to ensure you get the best experience on our website.
See our Privacy Policy

Back in stock

Racingpack X-Cell 5,3Ah 7,2V with Tamiya connector Technical Data: Voltage: 7,2V Capacity: 5300mAh Gewicht: 434gram LxBxH: 137*47*25mm Connector: Tamiya Type: Sub C NiMh ..
€46.95 Ex Tax:€38.80
Shipped tomorrow
This is very soft wire and can be bend in many directions. Because this wire is very thin (1.3mm) it's very usefull for wiring your LED's in your model.   It comes in 11 different colours which make it easy to order your model. And use different colours for different functions. This wire ..
€0.49 Ex Tax:€0.41
This is very soft wire and can be bend in many directions. Because this wire is very thin (1.3mm) it's very usefull for wiring your LED's in your model.   It comes in 11 different colours which make it easy to order your model. And use different colours for different functions. This wire ..
€0.49 Ex Tax:€0.41
Shrinktube is used for a lot of things, but mostly for protecting open wires and contacts.Easy to use with a heat source like a heatgun or lighter...
€15.95 Ex Tax:€13.18
Shipped tomorrow
Shrinktube is used for a lot of things, but mostly for protecting open wires and contacts. Easy to use with a heat source like a heatgun or lighter. ..
€15.95 Ex Tax:€13.18
Shipped tomorrow
The Grand Hauler resembles a classic customized american tractor truck. The included 540 motor drives a 3-speed transmission, which has no problem turning the dual rear axles. Leaf spring and shocks keep the axles suspended to the metal C-Channel ladder frame, which keeps the power to the pavement. ..
€459.- Ex Tax:€379.34
Tie rod Tamiya, curved from steel, with this tie rod the steering works better, suitable for all euro-trucks, this shipment included : 1 tie rod and construction manual Part. Nr.: 13516   ..
€7.99 Ex Tax:€6.60
Only 4 left in stock
Wheel bolt remodeling-set, for the front axle from all Tamiya - truck´s, if you change the wheel bolts and the ball heads you can reduce the clearenc ofthe wheel to a minimumt, so the steering works better, this shipment included: 2 wheel boltsfrom steel, 2 ball headsfrom steel, 2 shim rings and 2..
€17.95 Ex Tax:€14.83
Shipped tomorrow
Alu - flat bed twin rim, 1/14 Scale and 1/16 Double rim with two ball bearing seats for ball bearing 5x11x4, rim diameter29mm, width 29mm, suitable for the low loader tires No.220613 and No. 207054, Conten..
€45.95 Ex Tax:€37.98
Only 2 left in stock
6 - chamber LED board 7,2 Volt, 1 pair (1x left,1x right) populated with SMD-LEDs, common positive polel, 5 performance for the light, length of the cable ca. 20cm, suitable for item code: 907038, ( the tail lamps are not included )..
€59.95 Ex Tax:€49.55
Shipped tomorrow
7 - chamber LED board 7,2 Volt, 1 pair (1x left,1x right) populated with SMD-LEDs, common positive polel, 5 performance for the light, length of the cable ca. 20cm, suitable for item code: 907037, ( the tail lamps are not included ) ..
€59.95 Ex Tax:€49.55
Shipped tomorrow
Scania top light holder with chromed lights, only for the Scania from Tamiya. The light holder is formed from brass and chrome, the lights are from plastic and chrome-plated, you can retrofit them with bulbs, 4 white and 4 blue glasses and the fixing srews are included, measure: width ca. 130mm , le..
€72.95 Ex Tax:€60.29
Shipped tomorrow
7 - chamber - tail lamps, suitable for scale 1:16 - 1:14.5, measure: length 32mm, width 12mm, height 7mm, included: 2 housings reflecting inside, 2 red and 4 white glasses for signal and back light, to fix it with 2 scrwes M2x6 from behind Part. Nr.: 907037   ..
€18.95 Ex Tax:€15.66
3 - chamber - tail lamps, suitable for scale 1:14.5, included: 2 housings from aluminum with 3 chambers ( can be lighted ), 2 red and 2 yellow glasses, diameter ca. 11mm, height ca.6mm Part. Nr.: 907039   ..
€18.95 Ex Tax:€15.66
Rectangle light, with lighting board 7,2 Volt, scale 1:14, housing from plastic, glass fluted, measure: housing 8,5 x 8,5mm, depth 7mm, total height with foot 14mm, fastener Ø 2mm x 2,5mm length, lighting board 4,8 x 4mm, length of the cable 20cm, included: 2 housings black, 2 glasses, 2 resistors, ..
€24.95 Ex Tax:€20.62
Shipped tomorrow
Rectangle light, with lighting board 12 Volt, scale 1:14, housing from plastic, glass fluted, measure: housing 8,5 x 8,5mm, depth 7mm, total height with foot 14mm, fastener Ø 2mm x 2,5mm length, lighting board 4,8 x 4mm, length of the cable 20cm, included: 2 housings black, 2 glasses, 2 resistors, 2..
€24.95 Ex Tax:€20.62
Shipped tomorrow
This is very soft wire and can be bend in many directions.Because this wire is very thin (1.1mm) it's very usefull for wiring your LED's in your model.It comes in 11 different colours which make it easy to order your model.And use different colours for different functions.This wire is normally only ..
€2.59 Ex Tax:€2.14
Professionelle, moderne und technisch hochwertige 6-Kanal Fernsteueranlage für den universellen Einsatz in vielen RC-Fahrzeugen und Schiffen. Es können unabhängig 6 Kanäle über 2 Steuerknüppel und 2 Schalter (1x Taster/1x Schalter) angesteuert werden. Das REFLEX STICK 6 Channel System ist mit der ..
€94.95 Ex Tax:€78.47
Only 1 left in stock
Highlights & details   Metal-clad rims   Description Detailed model of a European refrigerated trailer. The Tamiya refrigerator container illustrated numerous details. Cooling unit and underground storage room are cloned true to original. The flyer-support/brack..
€479.- Ex Tax:€395.87
The US-style TAMIYA "Gallant Eagle" tanks are a typical example of how it is used for fuel transportation in North America. The stainless steel tank is polished and sitting on an aluminum 2-axle frame with kingpin. The trailer supports driving under automatic docking. The chassis has..
€419.- Ex Tax:€346.28
Shipped tomorrow
The most used kind of drills around the world. Can drill in almost anything and lasts long.The price of the drills is so low it's no shame to demolish one...
€0.89 Ex Tax:€0.74
The most used kind of drills around the world.  Can drill in almost anything and lasts long. The price of the drills is so low it's no shame to demolish one. ..
€0.89 Ex Tax:€0.74
Red & Black Wire 2x 0.14mm Flat Very thin and flexibel wire. *Sold per meter. ..
€0.89 Ex Tax:€0.74
K Parts for the Mercedes Actros 1851 Gigaspace 56335These are the front fenders and steps for the mercedes actros, unpainted.Partnr: 19115368..
€18.95 Ex Tax:€15.66
Shipped tomorrow
Windows for the Mercedes Actros 1851 Gigaspace 56335   Part nr: 19115372 ..
€15.95 Ex Tax:€13.18
Shipped tomorrow
Front Rims for the Mercedes Actros 1851 Gigaspace 56335 These parts are new and unpainted. Part nr: 19335674 ..
€16.95 Ex Tax:€14.01
Shipped tomorrow
Front Tyres for the Mercedes Actros 1851 Gigaspace 56335Partnr: 56328 / 19808176..
€12.95 Ex Tax:€10.70
These casings are stronger then the stock housings. But still original tamiya items. This is an hop up option Replacement of the 9805523 Partnr: 56524 ..
€14.95 Ex Tax:€12.36
Only 1 left in stock
These are the head and tail lights clear parts for the Mercedes-Benz 1838LS / 1850L 56305 / 56307Part nr: 0115192..
€5.99 Ex Tax:€4.95
Shipped tomorrow
Front Rims for the EU Trucks Scania R470 56318 Scania R620 MAN TGX 18.540 MAN TGX 26.540 Volvo FH12 56312 Mercedes-Benz 1838LS 56305 Mercedes-Benz 1850L   Partnr: 9225053 ..
€12.95 Ex Tax:€10.70
Shipped tomorrow
Showing 1 to 30 of 923 (31 Pages)

Our brands

Who are we

We are ready for you

Our employees are now available,Our employees are not available now
today from {from} am to {to} pm

Opening hours of our store

monday
12:00 - 18:00
tuesday
10:00 - 18:00
wednesday
10:00 - 18:00
thursday
10:00 - 18:00
friday
10:00 - 21:00
saturday
10:00 - 17:00
sunday
12:00 - 17:00


Wetronic Modeling

Dorpsstraat 12
3433CH Nieuwegein
The Netherlands

Pay securely with
Fast shipping via