Carson
€499.-
Ex Tax:€412.40
3 - chamber - tail lamps, suitable for scale 1:14.5, included: 2 housings from aluminum with 3 chambers ( can be lighted ), 2 red and 2 yellow glasses, diameter ca. 11mm, height ca.6mm
Part. Nr.: 907039
..
€19.95
Ex Tax:€16.49
6 - chamber LED board 7,2 Volt, 1 pair (1x left,1x right) populated with SMD-LEDs, common positive polel, 5 performance for the light, length of the cable ca. 20cm, suitable for item code: 907038, ( the tail lamps are not included )..
€59.95
Ex Tax:€49.55
6 - chamber - tail lamps, suitable for scale 1:16 - 1:14.5, for truck`s, measure: total length 38mm, length glass 27mm, width 11mm, height 6,5mm, included: 2 housings reflecting inside, 2 red and 2 white glasses,Part Nr.: 907038..
€19.95
Ex Tax:€16.49
Plastic door hinges , Plastic door hinges, plastic, hinged using a 1mm steel bolt. Open to an angle of 270°, with fixing screw´s, measure: length 22mm, width 7mm, height 4mm, 6 piece at this set.
Item code 907142
..
€16.95
Ex Tax:€14.01
With these adapters you can mount the front rims of Carson / Veroma on your trailer axle.Giving you trailer the close rim look like most modern trailers have.Part Nr.: 907158..
€29.95
Ex Tax:€24.75
Bellow, gunning from rubber, hart construction, suitable for heavy models, measure: diameter 20mm, height 18mm, one set with 2 pice
Item code 907358
..
€6.99
Ex Tax:€5.78
Bellow, gunning from rubber, soft construction, suitable for light models to 5 kg, measure: diameter 20mm, height 18mm, one set with 2 pice
Item code 907357
..
€6.99
Ex Tax:€5.78
Bellow soft, gunning from rubber, suitable for light models to 10 kg, measure: diameter 26mm, height 21mm, one set with 2 piceItem code 907373..
€7.99
Ex Tax:€6.60
Air horn 42mm, scale 1:14, turned from brass turned and chrome, suitable for all Tamiya trucks, with fixing srews, included 1 piceItem code 907367..
€24.95
Ex Tax:€20.62
MAN TGX air horn - set, suitable for MAN TGX von Tamiya, the air horn`s are from brass and chrome, included: a long (42mm) and a short (36mm) air horn with fixing parts and a drill template
Item code: 907096
..
€29.95
Ex Tax:€24.75
Truck fanfare set, suitable turned for the Actros from Tamiya, brass and chrome, which is secured using two screws M1.6 x 8mm, Contents: 1 Fanfare 48mm long, 1 shortfanfare 41mm, 4 screws and 4 s..
€39.95
Ex Tax:€33.02
Aluminium Beugel voor planken TU4 1/14..
€54.95
Ex Tax:€45.41
Frame access cover fourwheeler, scale 1:14, from VA-chequered plate lasered and formed, drill holes for MFC are designed and can be taken out if you need, suitable for the Volvo, Scania and MAN fom Tamiya, measure: length 295mm, width 180mm, thickness 0,8mm, weight 220g, included: 1 access cover, 6 ..
€84.95
Ex Tax:€70.21
Aluminium Cylinder bevestiging Carson Goldhofer 1/14..
€47.95
Ex Tax:€39.63
Aluminium rims with 10 roundholes.Can be used with tamiya super single tyres or Carson Fulda Multitonn II 1/14These rims have the hub covers to cover the mounting nut of your rims.And can be used with the stock bearings 11x5x4mm.With this rims you no longer need the plastic stock rims.So you can bri..
€74.95
Ex Tax:€61.94
Aluminium scharnieren voor Carson Goldhofer 1/14..
€30.95
Ex Tax:€25.58
Aluminium Schotel plaat voor MFC..
€49.95
Ex Tax:€41.28
Angel Eyes LED board for 7,2 und 12 Volt, blue, two operation`s for the light, the ring from the side light`s shine blue, the traveling light shine white, suitable for all top light and front light holder, also for the auxiliary head light`s, included: 2 board`s with a cable with a length from 20cm,..
€36.95
Ex Tax:€30.54
Angel Eyes LED board for 7,2 und 12 Volt, white, two operation`s for the light, the ring from the side light`s shine blue, the traveling light shine white, suitable for all top light and front light holder, also for the auxiliary head light`s, included: 2 board`s with a cable with a length from 20cm..
€36.95
Ex Tax:€30.54
Bakwagen opbouw kort 1/14..
€299.-
Ex Tax:€247.11
Bakwagen opbouw voor Tamiya Volvo FH16 Bomenwagen 1/14..
€299.-
Ex Tax:€247.11
Bomen Trailer 3 Asser 1/14 - 907629..
€559.-
Ex Tax:€461.98
Euro - Bumper semitrailer, scale 1:14, from aluminum, suitable for a frame with a width from 96mm, suitable also for 7 - chamber - tail lamps with item code:. 207037 and the number plate holder with item code: 207001, included: 1 pice
Item code: 907361
..
€25.95
Ex Tax:€21.45
Euro - Bumper semitrailer, scale 1:14, from aluminum, suitable for a frame with a width from 96mm, suitable also for 3 - chamber - tail lamps with item code:. 207038 and the number plate holder with item code: 207001, included: 1 piceItem code 207051*Lamps and license plate holder not included..
€26.95
Ex Tax:€22.27
Cabinesluiting Aluminium Mercedes Arocs 1/14..
€37.95
Ex Tax:€31.36
Cap for 1:14 wheel hub, scale 1:14, black plastic, diameter 18mm, suitable for the front axle rim (wide) with item code 207006 and 207013, 2 pieces in this set..
€9.99
Ex Tax:€8.26
€7.50
Ex Tax:€6.20
The 3-axle dump trucks Fliegl Stone Master is an accurate and licensed replica of a current lap tray (halfpipe) for use on construction sites. With the optional tilt mechanism the trough can be tilted and discharged. When lowering the rear wall of the trough is automatically saved with the 2-hook lo..
€729.-
Ex Tax:€602.48