Beier EMS-24-G (Graupner)

1 - 30 Days Beier EMS-24-G (Graupner)

The one channel multiswitch modules at a glance:

  • Extension of RC control with additional 8 or 12 switches
  • Enables to control further 16 or 24 functions
  • Decoding of switches with sound modules USM-RC, USM-RC-2 and with multiswitch decoder MSD-16 possible
  • Connection requires free proportional channel
  • Installation inside and outside the radio remote control box possible, 
    extra box available
  • Important: compatible with every radio control system,
    due to special data transmission

Description

The one channel multiswitch module EMS is an extension for RC-control, available with 8 and 12 switches in order to control 16 or 24 additional functions, such as triggering sounds and lights.

The EMS is suitable for the sound module USM-RC-2 and the multiswitch decoder MSD-16

It is built into the radio control housing and requires for installation only one free proportional channel at the USM-RC-2 (X2/3 or X2/4). For connection no additional decoder is required.

Due to a special data transmission the EMS is compatible with most 2.4 GHz systems. This transmission is carried out with time division multiplex, which leads to a response time delay of up to 1,4s. 

Each switch has three positions: up - middle - down. With the positions "up" and "down" at least two functions can be controlled. The switches have a pushbutton function, they returning automatically to neutral (middle position). With the memory setting from the sound module USM-RC-2 and the multiswitch decoder MSD-16 each switching output can be activated/deactivated permanently.

The EMS is available in three different versions.

More information can be found in the operating manual (English)

Technical Data

EMS-16-R
Radio remote control:Optimal for Robbe/Futaba radios. 
With reconstruction/external box for all radios suitable.
Supply voltage 
(from radio):
3 - 5V DC
Power consumption:ca. 8mA
Number of switches:8
Number of switch positions:16 (2 at each switch)
Distance between switches horizontal:15mm
Distance between switches vertical:15mm
Size board:66 x 32 mm
Required height inside radio:26 mm (without switch lever)

EMS-16-G
Radio remote control:Optimal for Graupner radios. 
With reconstruction/external box for all radios suitable.
Supply voltage 
(from radio):
3 - 5V DC
Power consumption:ca. 8mA
Number of switches:8
Number of switch positions:16 (2 at each switch)
Distance between switches horizontal:12mm
Distance between switches vertical:15mm
Size board:66 x 47 mm
Required height inside radio:26 mm (without switch lever)

EMS-24-G
Radio remote control:Optimal for Graupner radios. 
With reconstruction/external box for all radios suitable.
Supply voltage 
(from radio):
3 - 5V DC
Power consumption:ca. 8mA
Number of switches:12
Number of switch positions:24 (2 at each switch)
Distance between switches horizontal:12mm
Distance between switches vertical:15mm
Size board:66 x 47 mm
Required height inside radio:26 mm (without switch lever)

Overview of compatible and not compatible radio remote controls


SenderExternal housing necessaryEMS-TypeCompatibility
Graupner 4014noEMS-16-G
EMS-24-G
Graupner mc-19noEMS-16-G
EMS-24-G
Graupner mc-22noEMS-16-G
EMS-24-G
Graupner mc-24noEMS-16-G
EMS-24-G
Graupner mc-32noEMS-16-G
EMS-24-G
Graupner mx-10, mx-12, mx-16, mx-20, mx-32yesEMS-16-G
EMS-24-G
1)
Robbe F-14noEMS-16-R
Robbe FC-16noEMS-16-R
Robbe FC-18noEMS-16-R
Spektrum DX5yesEMS-16-G
EMS-24-G
2)
Spektrum DX6yesEMS-16-G
EMS-24-G
2)
Spektrum DX7yesEMS-16-G
EMS-24-G
2)
FLY SKY FS-T6yesEMS-16-G
EMS-24-G
Turnigy 9XyesEMS-16-G
EMS-24-G

Legend:

Compatible (tested)
?Should be compatible (not tested)
Not compatible
1)At transmitters of the MX-series, there is a feature that should be noted:
The EMS module may only be switched on after the transmitter has bootet completly after power on! It still needs a switch installed in the plus line (orange cable) of the EMS, with the EMS can be turned on and off.
2)At these radio controls, the switch inputs are not true proportional inputs, but only switching inputs. Therefore, you have to use a channel of a stick for connection of the EMS! This channel can no longer be controlled with the stick.
Place your own photo's so other customers can have an look at your project Upload them here

Found an lower price?
Ask us if we can match the price within the Netherlands.


We are making everything possible to provide you the best products on the lowest prices possible. Due to the higher number of products in our store we think that is possible some of the prices on our products to not be accurate.

If you find one of our products with lower price than ours, please use this form. We will compare the prices and will send you an offer!

Rulebook:

1. Only regular prices at other local stores in the Netherlands do apply.
2. Shipping costs from the other store are added to the total price of the product.
3. Promotion and sales items do not apply to this.
4. Prices must be visible for all visitors of the store.
5. The product needs to be in stock at the other store and this must be listed at their page.
6. The price warranty is not backwards available.
7. False prices do not apply to this rule.
8. Products needs to be identical.

Please fill in the form below:
* Required fields

Write a review

Please login or register to review
  • Views: 3490
  • Product Code: BEI-EMS24G
  • Availability:
  • €94.95
  • Ex Tax: €78.47

Available Options

Tags: beier, multiswitch, ms16, wetronic,

De waardering van www.wetronic.nl bij Webwinkel Keurmerk Klantbeoordelingen is 9.2/10 gebaseerd op 793 reviews.