Beier EMS-16-G (Graupner)
Beier EMS-16-G (Graupner)
€89.95
Ex Tax: €74.34
100 dagen bedenktijd
Product description
The one channel multiswitch modules at a glance:
|
Description
The one channel multiswitch module EMS is an extension for RC-control, available with 8 and 12 switches in order to control 16 or 24 additional functions, such as triggering sounds and lights.The EMS is suitable for the sound module USM-RC-2 and the multiswitch decoder MSD-16.
It is built into the radio control housing and requires for installation only one free proportional channel at the USM-RC-2 (X2/3 or X2/4). For connection no additional decoder is required.
Due to a special data transmission the EMS is compatible with most 2.4 GHz systems. This transmission is carried out with time division multiplex, which leads to a response time delay of up to 1,4s.
Each switch has three positions: up - middle - down. With the positions "up" and "down" at least two functions can be controlled. The switches have a pushbutton function, they returning automatically to neutral (middle position). With the memory setting from the sound module USM-RC-2 and the multiswitch decoder MSD-16 each switching output can be activated/deactivated permanently.
The EMS is available in three different versions.
More information can be found in the operating manual (English).
Technical Data
| EMS-16-R | |||
|---|---|---|---|
| Radio remote control: | Optimal for Robbe/Futaba radios. With reconstruction/external box for all radios suitable. | ||
| Supply voltage (from radio): | 3 - 5V DC | ||
| Power consumption: | ca. 8mA | ||
| Number of switches: | 8 | ||
| Number of switch positions: | 16 (2 at each switch) | ||
| Distance between switches horizontal: | 15mm | ||
| Distance between switches vertical: | 15mm | ||
| Size board: | 66 x 32 mm | ||
| Required height inside radio: | 26 mm (without switch lever) | ||
| EMS-16-G | |||
|---|---|---|---|
| Radio remote control: | Optimal for Graupner radios. With reconstruction/external box for all radios suitable. | ||
| Supply voltage (from radio): | 3 - 5V DC | ||
| Power consumption: | ca. 8mA | ||
| Number of switches: | 8 | ||
| Number of switch positions: | 16 (2 at each switch) | ||
| Distance between switches horizontal: | 12mm | ||
| Distance between switches vertical: | 15mm | ||
| Size board: | 66 x 47 mm | ||
| Required height inside radio: | 26 mm (without switch lever) | ||
| EMS-24-G | |||
|---|---|---|---|
| Radio remote control: | Optimal for Graupner radios. With reconstruction/external box for all radios suitable. | ||
| Supply voltage (from radio): | 3 - 5V DC | ||
| Power consumption: | ca. 8mA | ||
| Number of switches: | 12 | ||
| Number of switch positions: | 24 (2 at each switch) | ||
| Distance between switches horizontal: | 12mm | ||
| Distance between switches vertical: | 15mm | ||
| Size board: | 66 x 47 mm | ||
| Required height inside radio: | 26 mm (without switch lever) | ||
Overview of compatible and not compatible radio remote controls
| Sender | External housing necessary | EMS-Type | Compatibility |
|---|---|---|---|
| Graupner 4014 | no | EMS-16-G EMS-24-G |  |
| Graupner mc-19 | no | EMS-16-G EMS-24-G | |
| Graupner mc-22 | no | EMS-16-G EMS-24-G | |
| Graupner mc-24 | no | EMS-16-G EMS-24-G | |
| Graupner mc-32 | no | EMS-16-G EMS-24-G | |
| Graupner mx-10, mx-12, mx-16, mx-20, mx-32 | yes | EMS-16-G EMS-24-G | 1) |
| Robbe F-14 | no | EMS-16-R | |
| Robbe FC-16 | no | EMS-16-R | |
| Robbe FC-18 | no | EMS-16-R | |
| Spektrum DX5 | yes | EMS-16-G EMS-24-G | 2) |
| Spektrum DX6 | yes | EMS-16-G EMS-24-G | 2) |
| Spektrum DX7 | yes | EMS-16-G EMS-24-G | 2) |
| FLY SKY FS-T6 | yes | EMS-16-G EMS-24-G | |
| Turnigy 9X | yes | EMS-16-G EMS-24-G | |
Legend:
| Compatible (tested) |
| ? | Should be compatible (not tested) |
 | Not compatible |
| 1) | At transmitters of the MX-series, there is a feature that should be noted: The EMS module may only be switched on after the transmitter has bootet completly after power on! It still needs a switch installed in the plus line (orange cable) of the EMS, with the EMS can be turned on and off. |
| 2) | At these radio controls, the switch inputs are not true proportional inputs, but only switching inputs. Therefore, you have to use a channel of a stick for connection of the EMS! This channel can no longer be controlled with the stick. |
Specifications
Other options
Model: W-9601
Every modeller knows the point that the transmitters runs out of functions.
And it's always just a bit to soon, you just lik..
€59.95
Ex Tax:€49.55
Model: BEI-UFR-1230
The latest addition to the Beier family.An adjustable ESC motor controller for your truck.This controller has been specially ..
€149.-
Ex Tax:€123.14
