Beier
With the switching module RC-SM-4, lights and other loads (e.g. motors, pumps, relays) can be switched directly via a channel of an RC remote control.
There are 4 outputs available on the switch module, which can be loaded with a current of up to 4 A. However, the total current of all outputs mus..
€27.95
Ex Tax:€23.10
Using the optocoupler adapter OKA-4, additional sound and light functions can be triggered via switching outputs at all USM sound modules.
The OKA-4 contains 4 separate in- and outputs. As soon as a voltage of 2,0 - 15,0 V is applied at the input, the corresponding output triggers. The polarity o..
€11.95
Ex Tax:€9.88
This print makes connecting your LED's and more to the outputs of the beier an piece of cake.
No more annoying soldering at the small and vulnerable flatcable.
The outputs can be found on pin 1 - 8.
Pin 9-10 are all connected together you can use these for connecting all the positive wires toge..
€13.95
Ex Tax:€11.53
This print makes connecting your LED's and more to the outputs of the beier an piece of cake.
No more annoying soldering at the small and vulnerable flatcable.
This version has the pluggable resistors no more soldering resistors on your LED's if you use the correct value resistors.
The outputs ..
€18.95
Ex Tax:€15.66
The UFR-1230-D at a glance:Speed controller for two brushed DC motorsDesigned especially for tracked vehicles and ships with two drive motorsSupply voltage: 6 - 18 VMaximum motor current: 2 x 30 APowerful BEC with 5,6 V, 3 A8 switching-outputs for lights2 ports for connecting a sound moduleOptional:..
€169.-
Ex Tax:€139.67
The one channel multiswitch modules at a glance:Extension of RC control with additional 8 or 12 switchesEnables to control further 16 or 24 functionsDecoding of switches with sound modules USM-RC, USM-RC-2 and with multiswitch decoder MSD-16 possibleConnection requires free proportional channelInsta..
€89.95
Ex Tax:€74.34
The one channel multiswitch modules at a glance:Extension of RC control with additional 8 or 12 switchesEnables to control further 16 or 24 functionsDecoding of switches with sound modules USM-RC, USM-RC-2 and with multiswitch decoder MSD-16 possibleConnection requires free proportional channelInsta..
€99.95
Ex Tax:€82.60
Broken or lost your original cable?
Order an replacement right here.
..
€2.49
Ex Tax:€2.06
The MFR-1210 at a glance:
Mini speed controller for brushed DC motors
Perfect for auxilary drives and the
Complete speed control for small models
Supply voltage: 6 - 16 V
Max. current of motor: 10 A
BEC with 5,0 V and 0,5 A (short-term max. 1 A)
..
€32.95
Ex Tax:€27.23
The latest addition to the Beier family.An adjustable ESC motor controller for your truck.This controller has been specially developed by Beier for RC trucks that drive with brush motors.Its very high accuracy gives you absolute control over your truck.Additionally, this control has several other fe..
€149.-
Ex Tax:€123.14
The multiswitch converter modules at a glance:Perfect extension for radio control CARSON Reflex Stick Multi Pro 14 ChannelSuitable for sound module USM-RC-2 and speed controller UFR-1230Combined transmission of all switch signals with only one proportional channelPlug and play in..
€46.95
Ex Tax:€38.80
The multiswitch converter modules at a glance:
Perfect extension for radio control CARSON Reflex Stick Multi Pro 14 Channel
Suitable for sound module USM-RC-2 and speed controller UFR-1230
Combined transmission of all switch signals with only one proportional chan..
€46.95
Ex Tax:€38.80
The multiswitch converter modules at a glance:
Perfect extension for radio control CARSON Reflex Stick Multi Pro 14 Channel
Suitable for sound module USM-RC-2 and speed controller UFR-1230
Combined transmission of all switch signals with only one proportional chan..
€44.95
Ex Tax:€37.15
Beier Uitgang test LED bord voor SFR-1 / USM-RC3..
€9.99
Ex Tax:€8.26
The BT light module at a glance:
For controlling lights, servos and motors at semitrailers and trailers
Expansion module for SFR-1, USM-RC-2 and USM-RC-3
Supply voltage between 6 - 12 V
1:1 transmission of signals via Bluetooth
16 switching outputs for lights including special light ef..
€109.-
Ex Tax:€90.08
A little gadget for our sound speed controllers of the SFR-series and the sound module USM-RC-3.
With the Bluetooth module BTC-1, the modules can be controlled via Bluetooth using the Android app "SFR-1 Controller".
Using the app, all available functions (additional sounds, WAV player, lights,..
€21.95
Ex Tax:€18.14
This is the Trailer light module without the Bluetooth transmitter module needed for the truck!
Only use for additional trailers when you already have the bluetoothe transmitter module in your truck!
The BT light module at a glance:
For controlling lights, servos and motors at semitrailers..
€89.95
Ex Tax:€74.34
Lost your IR receiver for your trailer? Or have an extra trailer without the IR receiver.
Just buy it here for your project.
..
€4.99
Ex Tax:€4.12
Lost your transmitting diode for your truck? Or have an extra truck without the IR diode.
Just buy it here for your project.
..
€4.99
Ex Tax:€4.12
For an easy fixing of the sensor we offer a mouting for the magnetic sensor with a special 3D-print block. The sensor can be plugged into the block, which is srewed on top of the king pin.
Attention: The king pin must be made of a material that conducts the magnetic field lines well! King pins ma..
€9.99
Ex Tax:€8.26
The IR transmitter diode is mounted underneath the fifth wheel and the IR receiver is fixed on top of the king pin. For an easy mounting we offer a special clip in which the receiver can be clamped.
For the transmission of the infrared signal, the king pin has a hole in the middle.
..
€9.99
Ex Tax:€8.26
This can be used to equip other towing vehicles to control the LM-BT-16-4.
..
€21.95
Ex Tax:€18.14
Using the Bluetooth technology, the transmitter and receiver do not need visual contact with a range of several meters.
Subsequently, even after decoupling, the outputs are still controlled and switched on.
Using a magnetic sensor this drawback can be solved. In this case the Bluetooth connect..
€5.49
Ex Tax:€4.54
Description
You can connect your sound modules USM-HL-2 and USM-RC-2 with this cable to your PC. You only need a USB port for this.
Data cable K-USB-2 has two functions:
Function 1: Live diagnosis
Using the data cable you can monitor simultaneous in your Sound-Teacher the current settings ..
€25.95
Ex Tax:€21.45
Sound Speed Controller SFR-1
The SFR-1 at a glance:
Combination of sound module, speed controller and light control unit
Much easier connection and easier programming than with separately sound module and speed controller
..
€259.-
Ex Tax:€214.05
We include the software on the SD card, you dont have to buy this seperate!
The SFR-1-D at a glance:
Allround module: combination of double speed controller, sound module and light control unit
Suitable for all types of RC models with two motors
For brushed DC ..
€299.-
Ex Tax:€247.11
Description
2-pole cable to connect loudspeakers to the sound module USM-RC-2.
The cable length is approx. 25 cm and can be shortened.
..
€1.49
Ex Tax:€1.23
Standby Switch for Beier SFR-1
..
€5.49
Ex Tax:€4.54
To pin X5/6 a switch can be connected to control the motor manually without the radio. The speed of the motor can be set in the LM-Teacher.
..
€5.99
Ex Tax:€4.95
With the switching module SM 2-4Q consumers with a high current (up to 10 A e.g. motors, lights, pumps, etc.) can be connected. The SM-2-4Q is used in case the maximum possible switching current of a BEIER module (SFR, USM or UFR) output is not sufficient for the connected load.
The outputs o..
€34.95
Ex Tax:€28.88
- 1
- 2
Showing 1 to 30 of 47 (2 Pages)