-400x400.jpg)
M2C Racing
M2C Racing parts are one of the best upgrades for your rc car. They produce rigid parts for almost all the existing brands and models on the market!
-400x400h.png "M2C Racing"){kind=logo}
M2C Racing parts are one of the best upgrades for your rc car. They produce rigid parts for almost all the existing brands and models on the market!
.png){kind=logo}
Brand: M2C Racing
With these hinge pins your Traxxas MAXX gets even stronger, these hinge pins are made using 4140 tool steel.
For longer durability we coated them with black oxide to improve rust resistance.
We use 4mm locknuts to ensure that nothing pops out on 1 end of the hinge pen and an flattend machine hea..
€59.95
Ex Tax:€49.55
Brand: M2C Racing
This slide is made using 7075 aircraft aluminum. It is designed to use with p.n. 1404 (our stock replacement motor mount).
It comes with the necessary screw hardware for mounting.
..
€37.95
Ex Tax:€31.36
Brand: M2C Racing
This is for the missing pieces 1405 REAR BLOCK and 1406 DELRIN TOP BLOCK to complete the 1453 and make it into the 1452 reverse motor mount kit for S Series Trucks.
..
€29.95
Ex Tax:€24.75
Brand: M2C Racing
M2C 1409 TOP MOUNT ESC PLATE FOR SLEDGE STYLE TRUCKS WITH M2C MOTOR MOUNTS..
€49.95
Ex Tax:€41.28
Brand: M2C Racing
Its finally here! The motor mount you've all been waiting for!
This mount has been tested by some of the hardest bashers in the world, and now you can have one too.
Made of 7075 t6 aluminum and machined right here in the usa. This will take your truck to a whole new level!
No more busted gears ..
€169.-
Ex Tax:€139.67
Brand: M2C Racing
This is the upgrade kit only if you already have the m2c 1413 motor mount!!! This will convert the 1413 front facing motor mount to the reverse motor mount.
Its finally here! The motor mount you've all been waiting for!
This mount has been tested by some of the hardest bashers in the world, an..
€139.-
Ex Tax:€114.88
-400x400w.jpg "Traxxas Sledge Front Driveshafts 2pcs - 1493")
Brand: M2C Racing
We are so excited to introduce another member of our M2C BEEFCAKE DRIVESHAFT family!
We've listened to the community and produced the best RC driveshafts on the market.
It’s been a long time coming and these shafts have survived our testers harshest abuse!
Length between centerline of pins: 133..
€64.95
Ex Tax:€53.68
Brand: M2C Racing
M2C 3054 UNIVERSAL TOP PLATE (FOR M2C E-MOTOR MOUNTS)..
€14.95
Ex Tax:€12.36
Brand: M2C Racing
This shock cap allows you to build an (emulsion style) zero rebound shock. coupled with the 16mm oring shock pistons we offer (3077 pistons), This helps with handling and a more stable landing off jumps.
This Kit will not fit EXB of V5 Models due to manufacturing changes from the previous versoin..
€74.95
Ex Tax:€61.94
Brand: M2C Racing
Made using 7075-t6 for maximum strength and tumbled finished.
This is a 4mm chassis stiffener bars for the Kraton 8s chassis.
..
€12.95
Ex Tax:€10.70
Brand: M2C Racing
So much more than just a bash bar ,the m2c chassis brace is engineered to strengthen and solidify the structural integrity of the vehicle!
Combined with the m2c 3473 it is the ultimate lightweight beast! Also has the slot mod to keep dirt out of your gears. ( you can use the brace as a template a..
€69.95
Ex Tax:€57.81
-400x400w.jpg "Differential CVD cross pins 3mm for ARRMA 8S models 310934")
Brand: M2C Racing
This pin is made of 4140 hardened steel with a black oxide finish.
If you are tired of pulling your diffs apart to replace this pin, m2c has the solution.
This is to replace the stock arrma part # ara310934
..
€9.99
Ex Tax:€8.26
-400x400.jpg "M2C X Series Motor Mount System - 1118")
Brand: M2C Racing
The latest addition to the M2C Product Adhesive is the M2C 1118 Sliding motormount mounting system!
The M2C 1100 is a one-piece design made from 6061 T6 aluminum.
Combined with the M2C 1101 MOTOR SLIDE you can now perfectly set your mesh and even change motors in the blink of an eye!
The..
€159.-
Ex Tax:€131.41
Brand: M2C Racing
M2C 1497 17MM SURELOC LUG NUT FOR M14 X 1 HEX ADAPTERS..
€44.95
Ex Tax:€37.15
Brand: M2C Racing
M2C 1183 X SERIES WIDE KIT-SINGLE REPLACEMENT AXLE..
€29.95
Ex Tax:€24.75
The new m2c racing x series is here! Built to fit x series trucks!!
M2c racing is proud to introduce another groundbreaking solution for the bashing community!
The all new 1129 x series chassis brace is engineered to take your truck to an entirely new level of bashing!
M2c racing and our te..
€74.95
Ex Tax:€61.94
The all new motor brace design is made especially for the real bashers out there. With the additional support you proctect your main motor mount in the X-MAXX.
When making high jumps or hard landings the motor weight is taking an lot of g-forces which can cause your main motor mount to bend under..
€49.95
Ex Tax:€41.28
With this shared central drive shaft for your Traxxas X-MAXX you no longer have to deal with bent drive shafts.
This problem is especially common with extreme jumping that causes the X-MAXX chassis to sag. Because the central drive shaft is aluminum, it also bends but, unlike the chassis, it does n..
€149.-
Ex Tax:€123.14
Special wheel adapters for the M2C Racing 1192 wide kit for the Traxxas X-MAXX.
With these adapters you can fit almost any 24mm Hex wheel on your Traxxas X-MAXX
Includes:
4x M2C-1190 24mm hub adapters
4x M2C-1189 Sureloc 24mm wheel nuts
Note: Will not work on any other axle except..
€69.95
Ex Tax:€57.81
Upgrade your Traxxas X-MAXX with this ultimate widekit it widens your Traxxas X-MAXX with 30mm in total and uses only the best materials there are so no reduction of strength.
The upgrade will give you more stability and a lower cq value. With this kit you can go faster then ever before.
Use t..
€119.-
Ex Tax:€98.35
This chassis bar will make your Traxxas MAXX V2 even stronger and prevent the chassis from bending.
This chassis bar is made of 6061-T6 aluminum in the USA.
This part only fits the V2 version MAXX.
..
€69.95
Ex Tax:€57.81
M2C 1401 ESC PLATE FOR SLEDGE STYLE TRUCKS - STOCK LOCATION..
€39.95
Ex Tax:€33.02
Support your motor on tough landings with this support brace for the M2C 1413 motor mount for the Traxxas Sledge.
This support ensures that your motor mount won't bend and or brake your motor mount bolts of with hard impacts.
To ensure your motor is supported correctly some foam tape is added ..
€24.95
Ex Tax:€20.62
M2C 1413 MOTOR MOUNT FOR SLEDGE STYLE TRUCKS..
€89.95
Ex Tax:€74.34
-400x400w.jpg "Traxxas Sledge Rear Dogbones 2pcs - 1494")
We are so excited to introduce another member of our M2C BEEFCAKE DRIVESHAFT family!
We've listened to the community and produced the best RC driveshafts on the market.
It’s been a long time coming and these shafts have survived our testers harshest abuse!
Length between centerline of pins: 132..
€49.95
Ex Tax:€41.28
Designed and build as upgrade for your Traxxas Sledge.
Made using 7075 t6 aircraft grade aluminum. These 17mm hex nuts are extended 6.5 mm for a total of 13mm extra width!
This is intended to help clear the rims from hitting the knuckles and rear uprights, expanding your choices for wheels
..
€79.95
Ex Tax:€66.07
The M2C 1499 chassis is finally here!
This exciting and innovative new chassis design from m2c racing is the toughest on the planet.
Our test team has pushed this chassis so far past the limit even we're surprised.
We have redesigned on the next level for the ultimate bashing experience.
Our c..
€179.-
Ex Tax:€147.93
This chassis is made of 4mm extra strong 7075 T6 Aluminum normally used in aircrafts.
On advise of our test team we have made changed to our design in the rear section to make the chassis even stronger and less flexible.
To reduce wear in the chassis we placed steel droop screw stops. As this is..
€159.-
Ex Tax:€131.41
Made from 4mm thick 7075 t6 aircraft grade aluminum, this is the strongest top plate on the market.
So if youre sick of ripping your front brace bolt out on front heavy landings, then here ya go!
This 4mm exb style skid plate fits almost all the arrma 1/7 and 1/8 scale 6s cars!
Including kr..
€24.95
Ex Tax:€20.62
So much more than just a bash bar ,the m2c chassis brace is engineered to strengthen and solidify the structural integrity of the vehicle!
Combined with the m2c 3473 it is the ultimate lightweight beast! Also has the slot mod to keep dirt out of your gears. ( you can use the brace as a template a..
€69.95
Ex Tax:€57.81
- 1
- 2
Showing 1 to 30 of 40 (2 Pages)
