ARRMA
M2C Parts are the best upgrades for your ARRMA RC Car. With almost all of the M2C upgrade parts on stock we are ready to take your order! Select your model below and see all the items we can offer you to make your ARRMA even tougher and stronger!
M2C Parts are the best upgrades for your ARRMA RC Car. With almost all of the M2C upgrade parts on stock we are ready to take your order! Select your model below and see all the items we can offer you to make your ARRMA even tougher and stronger!
.png){kind=logo}
Brand: M2C Racing
S SERIES Monster Shock Standoff Kit
These standoffs fit our S SERIES and CORALLY, as well as the TEKNO MT410 with our shock caps. Made from hardene..
€32.95
Ex Tax:€27.23
Of betaal in 3 termijnen van
€1098.33
Brand: M2C Racing
Take your ARRMA V4/V6 to the next level with these beefed-up hinge pins!
M2C Racing delivers a set of hardened steel hinge pins designed to withsta..
€19.95
Ex Tax:€16.49
Of betaal in 3 termijnen van
€665
Brand: M2C Racing
Ready to bash harder than ever? The M2C 9mm front brace is your go-to upgrade for serious impact resistance!
Take your ARRMA Kraton or Notorious V6..
€39.95
Ex Tax:€33.02
Of betaal in 3 termijnen van
€1331.67
Brand: M2C Racing
Alu ESC Mounting Plate for ARRMA 6S V6 Models
The brand-new M2C 3039 ESC mounting plate for ARRMA 6S V6 is here! Designed to fit Spectrum, Castle C..
€49.95
Ex Tax:€41.28
Of betaal in 3 termijnen van
€1665
Brand: M2C Racing
Made from 4mm thick 7075 t6 aircraft grade aluminum, this is the strongest top plate on the market.
So if youre sick of ripping your front brace bo..
€26.95
Ex Tax:€22.27
Of betaal in 3 termijnen van
€898.33
Brand: M2C Racing
Upgrade your ARRMA Notorious V6 with the M2C Alu 7075 Rear Center Brace!
Crafted from 7075-T6 aluminum and 9mm thick, this brace is built to handle..
€39.95
Ex Tax:€33.02
Of betaal in 3 termijnen van
€1331.67
Brand: M2C Racing
Replacement slide for the ARRMA 6S motor mount M2C 3050.
..
€21.95
Ex Tax:€18.14
Of betaal in 3 termijnen van
€731.67
Brand: M2C Racing
These pillar ball nuts are made using 6061-T6 aluminum.
the kit comes with delrin bushings to give you a set and forged fit.
The nuts are de..
€34.95
Ex Tax:€28.88
Of betaal in 3 termijnen van
€1165
Brand: M2C Racing
These skid plates are made using 4 mm 7075-T6 material. The plates are tumbled finished and counter sunk extra deep to protect the screw heads.
The..
€19.95
Ex Tax:€16.49
Of betaal in 3 termijnen van
€665
Brand: M2C Racing
M2C 3061 ARRMA FRONT SKID PLATE KRATON, TALION, OUTCAST,
These protection plates are made from 4mm 7075-T6 material, and will work with the T-Bo..
€19.95
Ex Tax:€16.49
Of betaal in 3 termijnen van
€665
Brand: M2C Racing
Alu Chassis Brace Rod Ends for ARRMA 6S
The M2C lauminum chassis brace rod ends are designed specifically for the ARRMA 6S series. These rod ends ..
€19.95
Ex Tax:€16.49
Of betaal in 3 termijnen van
€665
-400x400w.jpg "M2C Arrma Talion Front Shock Tower - 3107")
Brand: M2C Racing
Made using 7075-T6 and has a natural polished finish.
7 mm thick on the frame portion to add strength These towers have been hard bashed by out tes..
€64.95
Ex Tax:€53.68
Brand: M2C Racing
Made using 7075-T6 aluminum and has a natural polished finish. 7 mm thick on the frame portion to add strength. These towers have been hard bashed by ..
€59.95
Ex Tax:€49.55
Brand: M2C Racing
M2C Drive Shaft Flat Pins for ARRMA 8S - Quality and Durability
These pins are made from 4140 hardened steel with a black oxide finish for maximum ..
€9.99
Ex Tax:€8.26
Of betaal in 3 termijnen van
€333
-400x400h.jpg "M2C Racing ARRMA Replacement “B” Block 7075-T6 For 3125 Kit – 3127")
Brand: M2C Racing
Need a fresh B-block for your M2C 3125 setup? The M2C 3127 replacement B block is machined from 7075‑T6 aluminum to keep your ARRMA 6S front-end geome..
€39.95
Ex Tax:€33.02
Of betaal in 3 termijnen van
€1331.67
Brand: M2C Racing
Made using 7075 T6 aluminum. This is a replacement "D" block for the 3130
..
€39.95
Ex Tax:€33.02
Of betaal in 3 termijnen van
€1331.67
-1-400x400h.jpg "M2C Arrma Kraton 8S Chassis Kit - 3200")
Brand: M2C Racing
This chassis is made using 7075-t6 AIRCRAFT ALUMINUM and has a natural tumbled finish to remove burrs.
This is a modular design and allow you to a..
€289.-
Ex Tax:€238.84
Of betaal in 3 termijnen van
€96.33
-400x400w.jpg "M2C Racing Front 8mm Chassis Stiffner Bar for ARRMA 8S - 3201")
Brand: M2C Racing
Tune the feel of your Kraton 8S chassis: the M2C 3201 front stiffener bar uses 7075‑T6 aluminum and an 8mm profile to help you dial in chassis flex fo..
€21.95
Ex Tax:€18.14
Of betaal in 3 termijnen van
€731.67
-400x400w.jpg "M2C Racing Rear 8mm Chassis Stiffner Bar for ARRMA 8S - 3202")
Brand: M2C Racing
Tune the feel of your Kraton 8S chassis: the M2C 3202 rear stiffener bar uses 7075‑T6 aluminum and a 8mm profile to help you dial in chassis flex for ..
€21.95
Ex Tax:€18.14
Of betaal in 3 termijnen van
€731.67
Brand: M2C Racing
Made using 7075-t6 for maximum strength and tumbled finished.
This is an optional 6mm chassis stiffener bar for the Kraton 8s chassis. this option ..
€29.95
Ex Tax:€24.75
Of betaal in 3 termijnen van
€998.33
Brand: M2C Racing
Made using 7075-t6 for maximum strength and tumbled finished.
This is a 4mm chassis stiffener bars for the Kraton 8s chassis.
..
€29.95
Ex Tax:€24.75
Of betaal in 3 termijnen van
€998.33
Brand: M2C Racing
Made using 7075-T6 aluminum and machined polished. These towers are made out of 9 mm thick material for extrerme performance. Designed to withstand th..
€79.95
Ex Tax:€66.07
Brand: M2C Racing
Made using 7075-t6 aircraft aluminum and polished.
This bracket is to replace the stock plastic bracket. We made this part to transfer the breakin..
€34.95
Ex Tax:€28.88
Of betaal in 3 termijnen van
€1165
Brand: M2C Racing
Made using 7075-T6 aircraft aluminum. This is a direct replacement part for the end of the servo saver.
The stock plastic version wears out fast en..
€10.95
Ex Tax:€9.05
Of betaal in 3 termijnen van
€365
Brand: M2C Racing
These 8 hole shock pistons are made using Delrin material. This unique design allows for the same pack on the down stroke.
On the rebound the s..
€32.95
Ex Tax:€27.23
Of betaal in 3 termijnen van
€1098.33
Brand: M2C Racing
Made using 7075-t6 AIRCRAFT ALUMINUM.
This slide is designed to fit the STOCK motors.
This slide also includes a .2mm face clearance of the moto..
€34.95
Ex Tax:€28.88
Of betaal in 3 termijnen van
€1165
Brand: M2C Racing
Made using 7075-t6 AIRCRAFT ALUMINUM. This slide is designed to fit the larger 56 mm motors. Due to it's design it will use (3) 4 x 16 grade 10.9 scre..
€34.95
Ex Tax:€28.88
Of betaal in 3 termijnen van
€1165
-400x400w.jpg "M2C Arrma 8S Large Pinion Gear Sliding Motor Mount -3254")
Brand: M2C Racing
This slide is made using 7075-t6 aircraft aluminum and polished.
This slides range is from 30 to 50+ pinion gear and only works with the 3250 M2C..
€36.95
Ex Tax:€30.54
Of betaal in 3 termijnen van
€1231.67
Brand: M2C Racing
Arrma 8S motor for Stock Chassis, This mount is made using 7075-T6 Aircraft aluminium and Polished.
This mount mount is designed to fit the S..
€69.95
Ex Tax:€57.81
Brand: M2C Racing
Upgrade your ARRMA Kraton 8S with this serious rear skid plate solution!
The M2C Racing aluminum rear skid plate brace is engineered for the ARRMA ..
€64.95
Ex Tax:€53.68
